10 Maintenance
32
100_0201_mt_0004.fm
Installing the spark plug
1. First, screw in the spark plug by hand and then tighten with a spark plug wrench. The torque setting
is 25 Nm.
2. Attach the spark plug cap to the spark plug.
10.2.10 Clean/replace the fuel filter
1. Disconnect the fuel line and then remove it from the fuel filter.
2. Unscrew the fuel filter and remove.
3. Wipe the visible residue and dirt particles from the outside of the fuel filter screen with a clean, dry,
lint-free cloth.
4. Check the fuel filter screen for cracks, damage and dirt particles. Replace if damaged and
contaminated.
5. Reinstall the fuel filter.
6. Before restarting the machine, check the fuel system for leaks.
NOTICE
Screwed-in spark plugs that are too loose or too tight may cause engine damage.
Tighten the spark plug with the prescribed torque setting.
Item
Designation
1
Fuel filter
NOTICE
In order to ensure a secure connection, cut the fuel line about 10 mm (3/8") from the end
and connect to the fuel filter.
1
Summary of Contents for BS Series
Page 50: ......
