8 Storage
100_0201_tr_0001.fm
17
1. Attach suitable sling gear to the control handle.
2. Carefully load the machine into or onto a stable means of transport capable of bearing the load. Turn
the machine on its side.
3. After loading the machine, lash down the machine to prevent it from rolling off, slipping, or tipping
over. Attach and tension the tension belt over the vibratory rammer.
8
Storage
If the machine will not be operated for longer periods of time, e.g. during the winter months, carry out the
following activities.
In order to avoid possible damage, the following points must be observed:
Do not store the machine outdoors.
Store dry and free of dust.
Protect from direct sunlight.
Emptying the fuel system:
Some of the gasoline in fuel evaporates when stored for a long period of time. The 2-stroke oil in the fuel
does not evaporate. After being stored for a prolonged period of time, the mixing ratio of the gasoline/2-
stroke oil would no longer be correct. That is why the fuel system must be empty when stored for
prolonged periods of time.
1. Remove dirt accumulation in the area of the fuel cap.
2. Unscrew the fuel cap and remove.
3. Pump the fuel into a suitable container or tank, e.g. with a suction lift pump.
4. Replace fuel cap and tighten.
5. Start the engine and allow it to idle until the fuel in the carburetor has been used and the engine stops.
Item
Designation
1
Control handle
Item
Designation
1
Attachment of the tension belt
1
1
