CT 36 / CT 48
Safety Information
wc_si000139gb.fm
7
2.2
Operating Safety
Familiarity and proper training are required for the safe operation of the
machine. Machines operated improperly or by untrained personnel
can be dangerous. Read the operating instructions contained in both
this manual and the Engine Manual and familiarize yourself with the
location and proper use of all controls. Inexperienced operators should
receive instruction from someone familiar with the machine before
being allowed to operate it.
2.2.1
NEVER allow anyone to operate this equipment without proper
training. People operating this equipment must be familiar with the
risks and hazards associated with it.
2.2.2
NEVER touch the engine or muffler while the engine is on or
immediately after it has been turned off. These areas get hot and may
cause burns.
2.2.3
NEVER use accessories or attachments that are not recommended by
Wacker. Damage to equipment and injury to the user may result.
2.2.4
NEVER leave the machine running unattended.
2.2.5
NEVER operate the machine with the beltguard missing. Exposed
drive belt and pulleys create potentially dangerous hazards that can
cause serious injuries.
2.2.6
NEVER operate this machine in applications for which it is not
intended.
2.2.7
NEVER use the trowel around pop-ups in the concrete that are lower
than the lowest ring on the ring guard.
2.2.8
NEVER lift the machine solely by the handle. The component may fail,
causing the machine to fall, possibly injuring bystanders.
2.2.9
ALWAYS wear protective clothing appropriate to the job site when
operating the machine.
2.2.10
ALWAYS wear hearing and eye protection when operating this
machine.
2.2.11
ALWAYS remain aware of moving parts and keep hands, feet, and
loose clothing away from the moving parts of the machine.
2.2.12
ALWAYS read, understand, and follow procedures in the Operator’s
Manual before attempting to operate the machine.
2.2.13
ALWAYS store the machine properly when it is not being used. The
machine should be stored in a clean, dry location out of the reach of
children.
2.2.14
ALWAYS close fuel valve on engines equipped with one when
machine is not being operated.
WARNING
Summary of Contents for CT 36
