BA 1404 en – Edition 2.7 * 1404b210.fm
2-5
Safety instructions
2.6 Safety instructions regarding operation
Normal operation
• Put the machine into operation only after you have fastened and tightened the seat belt.
• Apart from the operator, no other persons are allowed to ride on the machine.
• Raise the control lever base before releasing the seat belt in order to avoid uninten-
tional operation.
• Avoid any operational mode that might be prejudicial to safety!
• Apart from the operator, no other persons are allowed to ride on the machine.
• Before beginning work, familiarize yourself with the surroundings and circumstances of
the job site. These are, for example, obstacles in the job site and travel area, the soil
bearing capacity and any necessary barriers separating the job site from public roads.
• When driving across a slope with the telescopic travel gear extended, position the
boom facing down the slope and the bucket about 10 – 20 cm above the ground. This
reduces the risk of injuries and damage to a minimum in the event of a hose rupture on
the telescopic ram, which might cause the travel gear to retract (narrow track) and
jeopardize the machine’s stability.
• Take the necessary precautions to ensure that the machine is used only when in a safe
and reliable state!
Operate the machine only if all protective and safety-oriented devices, for example
removable safety devices, soundproofing elements and mufflers, etc., are in place and
fully functional!
• Check the machine at least once a day/per work shift for visible damage and malfunc-
tions! Report any changes (incl. changes in working behavior) to the competent organi-
zation/person immediately! If necessary, stop the machine immediately and lock it!
• In the event of malfunctions, stop the machine immediately and lock it! Have any
malfunctions rectified immediately!
• Start and operate the machine only from the operator seat!
• Driving and working with the machine is allowed only with the seat belt fastened and
tightened. Stop the engine before releasing the seat belt!
• Perform start-up and shut-down procedures in accordance with the Operator’s Manual,
and observe the indicator lights!
• Before putting the machine/attachment into operation (start-up/moving), ensure that no
one is at risk by putting the machine/attachment into operation!
• Before driving with the machine, and also after interrupting work, check whether the
drive levers, the signaling and the light systems are functional!
• Before starting machine travel always check whether the supplementary equipment
and the attachments have been safely stowed away or attached!
• When driving on public roads, ways and places, observe the valid traffic regulations
and, if necessary, ensure beforehand that the machine is in a condition perfectly
compatible with these regulations!
• Always switch on the lights in conditions of poor visibility and after dark!
• No lifting, lowering or carrying persons in the work equipment/attachments!
• Installing a man basket or a working platform is prohibited!
• When crossing underpasses, bridges and tunnels, or when passing under overhead
lines always ensure that there is enough clearance!
• Always keep a safe distance from the edges of building pits and slopes!
Summary of Contents for E09-01
Page 8: ...1 6 BA 1404 en Edition 2 7 Ba1404en2_7IVZ fm Table of contents...
Page 23: ...BA 1404 en Edition 2 7 1404b110 fm 1 13 Introduction Overview of safety labels...
Page 171: ...BA 1404 en Edition 2 7 1404b560 fm 5 43 Maintenance DIN 51 502 DIN 51 825 1000156007 1...
Page 172: ...5 44 BA 1404 en Edition 2 7 1404b560 fm Maintenance...
