BA 1404 en – Edition 2.7 * 1404b330.fm
3-15
Operation
The machine can be started without performing any further settings.
Coding a new key
• Insert master key
B
in the starter
• Turn the key to position
1
for a maximum 5 seconds
• Turn the key to position
0
and remove master key
B
• Now insert the new key or the key requiring coding in the ignition lock and turn it to
position
1
within 15 seconds
• This action registers the key
The procedure is automatically cancelled if no key requiring coding is detected within 15
seconds. Several keys requiring coding can be inserted one after another in the preheating
start switch. Each key must then remain at least 1 second in position
1
. Coding can be per-
formed for a maximum 10 keys.
Deleting coded keys
Deleting coded keys is necessary whenever a coded key is lost.
• Insert master key
B
in the starter
• Leave the key in position
1
for a minimum 20 seconds
• All coded keys are deleted after 20 seconds, and all existing keys can be re-coded
☞
The master key code is not deleted during deletion.
1
0
2
3
Abb. 52: Indicator lights
Summary of Contents for E09-01
Page 8: ...1 6 BA 1404 en Edition 2 7 Ba1404en2_7IVZ fm Table of contents...
Page 23: ...BA 1404 en Edition 2 7 1404b110 fm 1 13 Introduction Overview of safety labels...
Page 171: ...BA 1404 en Edition 2 7 1404b560 fm 5 43 Maintenance DIN 51 502 DIN 51 825 1000156007 1...
Page 172: ...5 44 BA 1404 en Edition 2 7 1404b560 fm Maintenance...
