3-34
BA 1404 en – Edition 2.7 * * 1404b330.fm
Operation
Horizontal adjustment
☞
Sit down on the operator seat
☞
Pull lever
2
on the left upward and at the same time
☞
Move the seat forward or backward
Backrest adjustment
☞
Turn rotary switch
3
in the required direction
➥
+
backrest inclination to the rear
➥
+
backrest inclination to the front
3.18 Seat belt
Danger
!
Do perform machine travel or operation with the seat belt unbuckled –
Injury hazard!
☞
Buckle up before starting machine travel or operation!
• Seat belt must not be twisted!
• Seat belt must run over the hips – not over the stomach – and must
always be applied tightly!
• Do not place the seat belt over hard, edged or fragile items (tools, rulers,
glasses, pen) carried inside your clothes!
• Never buckle up 2 persons (children!) with one seat belt!
• Check seat belts regularly. Have damaged parts immediately replaced
by a Wacker Neuson service center!
• Always keep the seat belt clean, as coarse dirt can impair proper functioning!
• Seat belt buckle must not be obstructed by foreign bodies (paper or sim-
ilar); otherwise the buckle latch cannot lock into place!
After an accident the belt strap is stretched and no longer serviceable. In an
accident, the seat belt
Will not provide appropriate protection!
☞
Replace the seat belt after an accident
☞
Have fastening points and seat fixture checked for bearing capacity!
Abb. 86: Horizontal seat adjustment
2
Abb. 87: Backrest adjustment
3
Summary of Contents for E09-01
Page 8: ...1 6 BA 1404 en Edition 2 7 Ba1404en2_7IVZ fm Table of contents...
Page 23: ...BA 1404 en Edition 2 7 1404b110 fm 1 13 Introduction Overview of safety labels...
Page 171: ...BA 1404 en Edition 2 7 1404b560 fm 5 43 Maintenance DIN 51 502 DIN 51 825 1000156007 1...
Page 172: ...5 44 BA 1404 en Edition 2 7 1404b560 fm Maintenance...