EH 6, EHB 7
3 Safety information
Operator's manual
15
V
e
rsion 001
3.5
Operating safety
Work environment
Familiarize yourself with your work environment before you start work. This in-
cludes e.g. the following items:
Obstacles in the work and traffic area.
Load-carrying capacity of the ground.
The measures needed to cordon off the construction site from public traffic.
The measures needed to secure walls and ceilings.
Options available in the event of an accident.
Safety in the work area
When working with the machine especially pay attention to the following points:
Electric lines or pipes in work area.
Gas lines or water lines in the work area.
No one may stay in the room to which a passage is broken through, since
there is a danger of injury from falling stones and tools.
Checks before starting work
Check the following points before beginning work:
Condition of tools.
Machine settings.
Connection value of the machine.
Starting the machine
Observe the safety information and warning notices located on the machine.
Never attempt to switch on a machine that requires maintenance or repairs.
Switch on the machine as directed in the operator's manual.
Vertical stability
Always make sure that you stand firmly when working with the machine. This ap-
plies particularly when working on scaffoldings, ladders, etc.
Caution with hot parts
Do not touch any hot parts such as tools or tool holders during operation or di-
rectly afterwards. These parts can become very hot and can cause severe burns.
Caution with movable parts
Keep your hands, feet and loose clothing away from moving or rotating machine
parts.
Summary of Contents for EH 6
