7-36
BA ET16 de* 1.0 * et16w710.fm
7 Maintenance
7.11 V-belt
WARNING
Injury hazard due to rotating parts!
Rotating parts can cause serious injury or death.
►
Open the engine cover only at engine standstill.
►
Remove the starting key and carry it with you.
CAUTION
Burn hazard due to hot surfaces!
Can cause serious burns.
►
Stop the engine and let hot surfaces cool down.
►
Wear protective equipment.
CAUTION
Injury hazard due to open maintenance access!
Can cause injury.
Take care to avoid injuries when the maintenance access door is open.
Checking V-belt tension
1. Stop and park the machine. Stop the engine. See “Preparing
lubrication”.
2. Raise the control lever base.
3. Remove the starting key and carry it with you.
4. Let the engine cool down.
5. Open the engine cover.
6. Carefully check the V-belt
A
for damage.
7. Press with your thumb about 100 N (22.5 lbs.) to check the deflection
of the V-belt between the crankshaft disk and the fan wheel. The
deflection should be between 7 and 9 mm (0.27 and 0.35 in).
8. Contact an authorized service center in the following cases:
- Damaged V-belt
- V-belt is touching the keyway base
- Damaged pulleys
- V-belt tension too low
Retension the V-belt
The V-belt may only be re-tensioned by an authorized service center.
Fig. 237
A
Summary of Contents for ET09-02
