![background image](http://html1.mh-extra.com/html/wacker-neuson/ez17/ez17_operators-manual_3134811196.webp)
7-50
OM EZ17 us 1.0 * ez17w710.fm
7
9. Repeat steps 2 – 8. Contact a Wacker Neuson service center if track
tension still is too low after pumping in more grease.
Reducing tension
1. Place a suitable container underneath to collect the grease.
2. Slowly turn lubricating valve
A
a maximum one revolution
counterclockwise to release the grease.
➥
The grease flows out of the groove of the lubricating valve.
3. Retighten the lubricating valve
A
.
4. Check the tension is correct by:
- Lowering the machine to the ground, starting the engine, letting it run
at idling speed without any load and slowly moving the machine
forward and reverse and switching it off again. Raise the machine
again by means of the boom and the stabilizer blade.
5. Check the track tension again.
➥
If it is not correct:
6. Adjust again.
Environment
Use a suitable container to collect engine/machine fluids as they flow out
and dispose of them in an environmentally friendly manner.
Fig. 219
A
Summary of Contents for EZ17
