Operating the Machine
50Hz Mobile Generators
wc_tx000884gb.fm
26
3.7
Preliminary Checklist
Prerequisites
Machine on a flat, horizontal surface
Wheels of trailer chocked
Procedure
Have a certified electrician set up the generator. Complete the following preliminary
checks before putting the generator into service.
1. Make a walk-around inspection of the generator. Open side doors and visually
inspect engine compartment for obvious damage or the presence of foreign
objects which might affect operation.
2. Fill the engine cooling system with coolant. See the engine manual.
3. Check and fill the engine sump with oil. See the engine manual.
4. Check the engine air filter.
5. Check the fuel level. Fill the fuel tank if necessary.
6. Remove the grounding stake
(a)
from the machine and drive it into the ground.
7. Connect the cable form the grounding stake to the machine at the grounding
location
(b)
.
8. Connect the battery.
Summary of Contents for G 43
