manualshive.com logo in svg

Wacker Neuson KRAMER 5055e, Operator'S Manual


Share
Download
background image

BA 357-00 *  3.0 * Sicherheit_E.fm

2-9

Safety 2

2.5

Lifting gear applications

Requirements

• The machine must be certified for lifting gear applications.
• Have loads fastened and the operator guided by a qualified person 

having specific knowledge of lifting gear applications and the usual 
hand signals.

• The person giving instructions to the operator must stay in visual 

contact with the operator when fastening, guiding or
removing the load (maintain visual contact).

• If this not be possible, ask one more person with the 

same qualifications to guide.

• The operator may not leave his seat as long as the load is raised.

Fastening, guiding and removing loads

• Follow the applicable specific regulations for fastening, guiding and 

removing a load.

• Wear protective clothing and equipment when fastening, guiding and 

removing loads (for example a hard hat, safety glasses, protective 
gloves, safety boots).

• Do not place lifting and fastening gear over sharp edges or rotating 

parts. Loads must be fastened so as to prevent them from slipping or 
falling.

• Move loads only on horizontal, level and firm ground.
• Move loads close to the ground.
• In order to avoid oscillating movements of loads:

- Perform smooth, slow movements with the vehicle.
- Use cables to guide the load (do not use hands to guide).
- Bear in mind the weather conditions (for example, the wind force).
- Keep a minimum safety distance from objects.

• The operator may allow the load to be fastened and removed only if 

the vehicle and its work equipment are not being moved.

• Danger zones must not overlap with the work zones of other vehicles.

Summary of Contents for KRAMER 5055e





































































































































































































































































































































































































































Reviews:

No comments

Related manuals for KRAMER 5055e

Case 721F Tier4B Service Manual preview
721F Tier4B
Brand: Case Pages: 22

Brands by name

Popular brands

Load more brands