Wacker Neuson KRAMER 5055e Operator'S Manual Download | Manualshive

Page: 31 / 420

background image

BA 357-00 * 3.0 * Sicherheit_E.fm

2-19

Safety 2

2.10 Measures for avoiding risks

Tires

• Have repair work on the tires only performed by trained technical

personnel.

• Check the tires for correct pressure and visible damage

(for example, cracks, cuts).

• Check the wheel nuts for tightness.
• Use only approved tires.
• The machine must have identical tires

(for example, profile, revolutions per mile).

Electrical system

• High-voltage components (HV components) of the machine (e.g. the

power electronics and converter) are subject to life-threatening
voltages (high-voltage = 60 V to 1500 V DC or 30 V to 1000 V AC).
Do not touch any parts that are under voltage.

• Only persons who have received additional training as an "Expert for

Work on HV Intrinsically Safe Machines" (DGUV Information 200-005)
are permitted to work on HV intrinsically safe machines in Germany.
HV systems are systems whose conductive components have been
secured against contact by means of suitable materials,
e.g. via firmly bolted covers or insulation.

• The machine must be de-energized when work is being performed on

HV components.

• Use only fuses with the specified current rating.
• In case of damage or malfunction in the electrical system:

- Put the machine out of operation immediately and

secure it against restart.

- Disconnect the battery connector.
- Have the malfunction repaired.

• Ensure that work on the electrical system is only

performed by trained technical personnel.

• Regularly check the electrical system. Have any malfunctions repaired

immediately (e.g. loose connections, defective insulation, scorched cables).

• The operating voltage of the machine and the attachment must be the

same (for example 12 V).

«
...
29
30
31
32
33
...
»

Summary of Contents for KRAMER 5055e





































































































































































































































































































































































































































Reviews:

No comments

Related manuals for KRAMER 5055e

Brand: ahlmann Pages: 63

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands