Wacker Neuson KRAMER 5055e Operator'S Manual Download | Manualshive

Page: 33 / 420

background image

BA 357-00 * 3.0 * Sicherheit_E.fm

2-21

Safety 2

Working near electric supply lines

• Before performing any work, the operator must check whether there

are any electric supply lines in the job site.

• If there are electric supply lines, only a vehicle with cabin may be used

(Faraday cage).

• Keep a safe distance from existing electric supply lines.
• If this is not possible, the operator must take other safety measures

(for example, switching off the current) in agreement with the operating
company or owner of the supply lines.

• If supply lines are exposed, they must be fastened, supported and

secured accordingly.

• If live supply lines are touched nevertheless:

- Do not leave/touch the cabin (Faraday cage).
- If possible, drive the machine out of the danger zone.
- Warn others against approaching and touching the machine.
- Have the live wire de-energized.
- Do not leave the vehicle until the supply lines that have been

touched or damaged have been safely de-energized.

Working near non-electric supply lines

• Before performing any work, the operator must check whether there

are any non-electric supply lines in the job site.

• If there are non-electric supply lines, the operator must take safety

measures (for example, switching off the supply line) in agreement with
the operating company or owner of the supply lines.

• If supply lines are exposed, they must be fastened, supported and

secured accordingly.

Behavior during thunderstorm

• Stop machine operation if a thunderstorm is gathering, stop the

machine, secure and leave it, and avoid being near it.

«
...
31
32
33
34
35
...
»

Summary of Contents for KRAMER 5055e





































































































































































































































































































































































































































Reviews:

No comments

Related manuals for KRAMER 5055e

MLT 961-145 V PLUS L JD ST4 S1

Brand: Manitou Pages: 180

Brand: Kubota Pages: 44

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands