manualshive.com logo in svg

Wacker Neuson KRAMER 5055e, Operator'S Manual


Share
Download
background image

4-12

BA 357-00 *  3.0 * 35700_04_Inbetriebnahme_01.fm

4 Putting into operation

Adjust the operator seat to individual requirements, for example to body 
size and posture. This prevents muscle tensions and fatigue during work.
Adjust the operator seat so that the control levers
and pedals are within easy reach with your back against the backrest.

Weight adjustment

NOTICE

Do not run the air compressor for more than 1 minute to 
avoid damage to it!

1. Sit down on the operator seat.
2. Pull handle

A

 upward or press it downward until the arrow is in the 

middle of window

B

.

➥

Within this visible range, the individual height can be
adjusted up to the minimum suspension travel.

➥

The minimum or maximum weight adjustment is
indicated with the audible upper and lower limits.

Horizontal adjustment

1. Sit down on the operator seat.
2. Pull lever

C

 up and at the same time, move the operator seat forward 

or backward.

3. Release the handle when reaching the required position.

➥

Once the operator seat is adjusted, engage the lever in the required 
position. It must not be possible to move the operator seat to 
another position.

Fig. 58

B

A

Fig. 59

C

Summary of Contents for KRAMER 5055e





































































































































































































































































































































































































































Reviews:

No comments

Related manuals for KRAMER 5055e

FERPINTA HERCULANO 40495104 Instruction Manual preview
HERCULANO 40495104
Brand: FERPINTA Pages: 40
Curtis Sno-Pro 5FBMQA Assembly/Mounting Instructions preview
Sno-Pro 5FBMQA
Brand: Curtis Pages: 14

Brands by name

Popular brands

Load more brands