manualshive.com logo in svg

Wacker Neuson KRAMER 5055e, Operator'S Manual


Share
Download
background image

BA 357-00 *  3.0 * 35700_04_Inbetriebnahme_01.fm

4-25

Putting into operation 4

Delete coded ignition key

It becomes necessary to delete an ignition key when an ignition key has 
been lost. 

1. Switch on the parking lights

– see chapter 5 “Parking lights/low beam” on page 5-19

.

2. Insert the master key (red) into the ignition lock, turn to position "

II

"  

and leave it in place for at least 20 seconds.

➥

All coded ignition keys (blue) are deleted and can be coded again

– see "Coding the ignition key" on page 4-24

.

Information

All coded keys (blue) are deleted.
The code of the master key (red) is retained.

Safety functions

• If more than 5 keys with different invalid codes are inserted and turned 

in the ignition lock within 1 minute, then the immobilizer remains 
enabled for 15 minutes and does not accept any valid keys.

➥

This function avoids "testing out" different keys in the
hopes of accidentally discovering the correct ignition key.

➥

Valid ignition keys are accepted only after 15 minutes and after the 
position 

0

 of the ignition lock has been detected. This prevents 

testing keys without actuating the mechanical ignition lock, for 
example by moving the ignition lock by force to position 

II

.

• Interruptions of the supply line or other control lines do not disable the 

immobilizer or delete data (for example data codes).

• All important data is saved in a non-volatile memory.

Summary of Contents for KRAMER 5055e





































































































































































































































































































































































































































Reviews:

No comments

Related manuals for KRAMER 5055e

Barko 295B Operator'S Manual preview
295B
Brand: Barko Pages: 96
Ditch Witch SK500 Operator'S Manual preview
SK500
Brand: Ditch Witch Pages: 75

Brands by name

Popular brands

Load more brands