5-8
BA 357-00 * 3.0 * 35700_05_Bedienung.fm
5 Operation
5.4
Machine travel operation
Important safety instructions for machine travel operation
WARNING
Accident hazard due to persons in the danger zone!
Serious injury or death can be caused by not staying clear of the danger
zone of the machine.
►
Ensure that no one is in the danger zone.
►
Stop all work movements immediately if persons enter
the danger zone.
►
Seal off the danger zone with barriers.
WARNING
Accident hazard when moving down a slope too fast!
Can cause serious injury or death.
Excessive speed can additionally damage the travel drive, brakes and
electric motor.
Overloading the hydraulic motor in overrun and exceeding the maximum
achievable torque of the hydraulic motor (acceleration due to grade
resistance) result in an emergency shutdown of the machine.
►
Select the next lower speed range
before performing downhill
machine travel.
►
Reduce engine speed: remove your foot from the accelerator pedal.
►
Reduce the travel speed with the brake pedal (intermittent braking).
WARNING
Crushing hazard due to tipping over of vehicle!
A tipping vehicle can cause serious injury or death.
►
Keep the loading unit lowered during machine travel.
►
Adapt the travel speed to the prevailing conditions.
►
Observe tilting limit of the machine.
►
Ensure that no parts of the body protrude outside the vehicle.
►
Do not exceed the permissible payloads.
Summary of Contents for KRAMER 5055e
