manualshive.com logo in svg

Wacker Neuson KRAMER 5055e, Operator'S Manual


Share
Download
background image

5-40

BA 357-00 *  3.0 * 35700_05_Bedienung.fm

5 Operation

Connecting hydraulic lines between machine and attachment

1. Pick up the attachment and safely lock it

– see "Attachments" on page 5-48

.

2. Release the pressure in the hydraulic lines

– see "Pressure relief – plug couplings" on page 5-33

.

3. Clean the hydraulic plug-and-socket connections.
4. Take the protective caps off the connections.
5. Couple the flexible lines. 

To do this, with the Kramer quickhitch, the flexible lines 

A

+

B 

from the 

3rd control circuit are connected to the plug couplings

C

+

D

 of the 

attachment.
With other quickhitches, flexible lines from the attachments are 
connected to the plug couplings on the machine (e.g., with SKID 
STEER attachments to the plug couplings

A

+

B

 of the FASTER block) 

– see "Hydraulic control circuits/plug couplings (overview)" on 
page 5-34

.

6. Check whether the hydraulic connections are engaged correctly. To do 

this, pull on the hydraulic hoses.

➥

The hydraulic connections must not be released as you do so.

7. Close exposed connections with protective caps.
8. Check that the hydraulic system of the attachment and the hydraulic 

connections are free of leaks. To do this, carefully move the 
attachment.

9. Check the attachment for correct function and response direction:

➥

– see "Operation of 3rd control circuit" on page 5-42

,

➥

– see "Continuous operation of 3rd control circuit" on page 5-44

.

 Fig. 131

B

A

SKID STEER option

A

B

D

C

Summary of Contents for KRAMER 5055e





































































































































































































































































































































































































































Reviews:

No comments

Related manuals for KRAMER 5055e

Brands by name

Popular brands

Load more brands