Safety
Metal Halide Lamp Safety 3.2
13
[en-US] | 02/2023 | 5100065071 | LTV 4L/6L | Operator’s Manual
3.2
Metal Halide Lamp Safety
WARNING
Personal injury hazard
Broken or punctured lamps can cause serious skin burns and eye inflamma-
tion from shortwave ultraviolet radiation.
►
Do not operate the light tower if a lamp is damaged.
►
Replace damaged lamps immediately.
Operating safety
• Replace damaged lamps. For instructions,
.
• Alternative lamps that automatically extinguish when the outer envelope
is broken or punctured are commercially available.
3.3
Radiation Compliance
This machine meets the radio interface radiated emission requirements of
European Standard EN 13309 for Construction Machinery.
The lamps provided with your light tower are electric discharge lamps. They
are designed for use with metal halide ballasts only, and require time to
reach full brightness on initial startup and after a power interruption. These
lamps comply with FDA regulation performance standard 21 CFR 1040-30.
3.4
Safety Guidelines for Operating the Machine
Operator and service training and knowledge
Before operating, maintaining, or servicing the machine:
• Familiarize yourself with the location and proper use of all controls and
safety devices.
• Know the rules for the jobsite.
• Contact Wacker Neuson for additional training if necessary.
Operator and service qualifications
Only trained personnel are permitted to start, operate, and shut down the
machine. They also must meet the following qualifications:
• Have received instruction on how to properly use the machine
• Are familiar with required safety devices
The machine must not be accessed or operated by:
• Children
• People impaired by alcohol or drugs
Application area
Be aware of the application area.
3
Summary of Contents for LTV 4L
Page 4: ...This page is intentionally left blank...
Page 104: ...Index 104 Operator s Manual LTV 4L 6L 5100065071 02 2023 en US...
Page 105: ......
