Commissioning
6.8 Installing the Mast
42
Operator’s Manual | LTV 4L/6L | 5100065071 | 02/2023 | [en-US]
6.8
Installing the Mast
Materials needed
• Mast assembly
• Hardware bag 5
Installing the mast
1.
Attach the light mount bracket
(1)
with two M16 x 40 serrated flange
screws
(2)
and two M16-10.9 serrated flange nuts
(3)
at the top of the
mast.
wc_gr014397
1
2
3
4
5
6
7
8
Fig. 16: Installing the mast
2.
Tighten the M16 x 40 serrated flange screws to a torque of
200 Nm (145 ft. lbs.).
3.
Attach the standard or power winch
(4)
:
ð
The manual winch is shown. For further information,
.
ð
The power winch is not shown. For further information,
the Power Winch on page 44
.
4.
Align the mast assembly
(5)
on top of the light tower mast base, as
shown.
5.
Use the tower lock pin
(6)
to align and stabilize the mast assembly.
6.
Secure the mast assembly in place with a B21 flat washer
(7)
and an
M20 lock nut
(8)
.
Note:
Tighten the M20 lock nut to secure the mast assembly in place
while allowing the mast assembly to rotate freely.
Summary of Contents for LTV 4L
Page 4: ...This page is intentionally left blank...
Page 104: ...Index 104 Operator s Manual LTV 4L 6L 5100065071 02 2023 en US...
Page 105: ......
