11 Maintenance
52
100_0101_mt_0007.fm
Changing the oil in the vibrator head
Opening the vibrator head
1. Remove any dirt around the connecting piece.
2. Clamp flexible shaft in a vice with prism jaws.
3. Unscrew the vibrator head from the flexible shaft with a large pipe wrench
(Caution! Left-hand thread).
4. Clean the thread of the vibrator head and the flexible shaft with a wire brush
and cleaning agent.
5. Clamp the vibrator head in the area of the connecting piece.
6. Unscrew the housing from the connecting piece with a large pipe wrench.
Changing the oil
1. Pour out oil and dispose of environmentally friendly.
2. Clean the threads of the connecting piece and the vibrator head with a wire
brush and cleaning agent.
3. Fill oil in the housing according to specification and in the correct amount, see
chapter Technical Data.
Item
Designation
Item
Designation
1
Housing
3
Shaft core adapter
2
Connecting piece
