Installation
PS3 1500 / PS3 2200
18
wc_tx001974gb.fm
3.7
Changing the Operating Voltage
The operating voltage of the motor can be changed from 110V to
220V depending on the available power source.
Requirements
•
Pump disconnected from the power source
•
Hand tools (screwdriver and wrench)
Procedure
Follow the procedure below to change the operating voltage of the
motor.
3.7.1
Remove the four bolts
(c)
, lockwashers
(d)
, and flat washers
(e)
that
fasten the housing cover
(j)
to the motor bracket.
3.7.2
Carefully lift the housing cover.
NOTICE:
Avoid entangling the power cord lead wires with internal compo-
nents such as the centifugal switch
(p)
or the capacitor
(o)
. Be careful not to
damage the O-ring
(w)
while lifting the housing cover.
3.7.3
Support the housing cover so that it allows access to the terminal box
(q)
.
WARNING
Electric shock hazard.
f
Ensure that the pump is disconnected from the power source before changing
the operating voltage.
wc_gr008856
p
Summary of Contents for PS3 1500
