Wacker Neuson PT Series, Service Manual

•

Recycle scrapped parts and drained fluids
according to environmental and hazardous
material requirements. To avoid fire and health
hazards, dispose of soiled shop towels by
approved methods.

•

Always retighten any screws, electrical
connections, or hose connections that may have
been loosened during maintenance and repair.

•

Any safety devices removed for setup,
maintenance, or repair purposes must be refitted
and checked immediately upon completion of the
maintenance and repair work.

Pump Modifications

•

Do not defeat safety devices.

•

Do not modify the pump without the express
written approval of Wacker Neuson.

•

Do not make any modifications, additions, or
conversions to the pump and its superstructures
or the pump's attachments without the approval of
Wacker Neuson. Such modifications may affect
safety and/or pump performance. This also
applies to the installation and adjustment of safety
devices. Use only accessories/attachments that
are approved by Wacker Neuson.

Safety Symbols Found in This Manual

Throughout this manual, the following key safety words
will be used to alert the reader of potential hazards.
Become familiar with these words and their meanings.
Take all precautions to avoid the hazards described.

!

 DANGER

Indicates an imminently hazardous situation
which, if not avoided, WILL result in death or
serious injury.

!

 WARNING

Indicates a potentially hazardous situation
which, if not avoided, COULD result in death or
serious injury.

!

 CAUTION

Indicates a potentially hazardous situation
which, if not avoided, MAY result in minor or
moderate injury and property damage. It may
also be used to alert against unsafe practices.

NOTICE

Indicates a potentially hazardous situation
which, if not avoided, MAY result in property
damage. It may also be use to alert against
unsafe practices.

Safety Label Inspection

Safety labels are critical to the safe operation of the
pump. Inspect the pump for any damaged, missing, or
unreadable labels. Replace labels as needed before
placing the pump back in service.

Keep Work Area Clean

A clean, organized, well-lit work area is important to
promote safe working conditions.

•

Keep floor clean of debris and clear of parts and
tools.

•

Clean up any spilled fuel, oil, and/or chemicals
immediately.

•

Store all air hoses and electrical cords properly
when not in use.

Keep Work Area Well-Ventilated

!

 WARNING

Never operate the engine without proper
ventilation. Exhaust fumes can be fatal if
inhaled.

Certain test and adjustment procedures require the
engine to be running. Be sure work area is well
ventilated. Never run the engine in an enclosed area.

Use Proper Eye and Face Protection

!

 WARNING

Always use approved personal protection
equipment. Avoid workplace hazards by
wearing properly maintained, approved eye and
face protection. Failure to use appropriate
protection equipment may result in serious
injury or death.

Always wear eye protection while in a shop environment.

FOREWORD 

5100048604 (12-18)

5