Support Pump Securely
1.
Place the pump on a solid, level surface.
2.
Secure the pump against unintentional movement.
3.
Stop engine, unless maintenance or repair is
required with engine running.
4.
Attach
Do Not Operate
warning tag to pump.
5.
Do not use wood or concrete blocks to support the
pump. Failure to properly support the pump may
result in death or serious injury.
Use Lifting Equipment Safely
!
WARNING
Always check the lifting capacity and condition
of hoists, slings, cables, or chains before use.
Using underrated or worn lifting components
can result in death or serious injury.
•
Always use a lifting device with a lifting capacity
greater than the weight of the item being lifted.
•
Secure the load to the lifting device using cables,
chains, or slings rated to handle the load being
lifted. Fasteners being used to connect lifting
devices must be strong enough to handle the
load. Be sure the mounting point of load is strong
enough to handle the load.
•
When using a lifting device, always connect the
load so it is balanced.
•
Always use a lifting device on a hard, level
surface.
•
Lower the lifting device to the lowest point before
moving. Move the load slowly.
•
Always support the load as soon as possible.
Never leave a load suspended in mid-air.
Use Compressed Air and Air Tools Safely
!
WARNING
Always wear approved eye and ear protection
while using compressed air. Misuse of
compressed air could result in death or serious
injury.
•
When using air nozzles, air pressure should not
exceed 30 psi (206.8 kPa).
•
Never direct air nozzles or tools at a person.
•
Never point air nozzles directly at skin.
•
Compressed air is a useful tool when used in a
safe manner.
•
Always use eye and ear protection while using
compressed air and air tools.
•
When using air tools, do not exceed the air
pressure rating for the tool.
•
When using an impact wrench, always use
approved impact sockets. Never use standard
sockets on an impact wrench.
•
Disconnect the air supply before changing air tool
attachments.
•
Always properly maintain air tools.
FOREWORD
5100048604 (12-18)
7
Summary of Contents for PT Series
