20
Description
RCP
ON/OFF switch
Switching on the machine
Turn on the machine with the ON/OFF switch. As long as the ON/OFF switch is
pressed, the machine runs in cutting operation or idle, depending on the setting
of the pressure release lever.
Switching off the machine
If the ON/OFF switch is released, the motor stops. In cutting operation the mov-
able knife stops in the current position.
Continuing the cutting movement after stop
If the ON/OFF switch is pressed again after a stop in the cutting operation, the
knife continues its movement until the original position.
Oil filler neck
The oil filler neck is used for filling and emptying the hydraulic oil tank.
A screw plug with sealing ring seals the opening in the oil filler neck.
Pressure release lever
Select operating mode cutting operation or release/idle with the pressure release
lever.
Operating mode cutting operation
When the ON/OFF switch is pressed the machine completes a complete cutting
movement and returns to the original position.
Item
Designation
1
Cutting operation ("I")
2
Release/Idle ("0")
Summary of Contents for RCP 12
