RCP
Safety information
13
Safety in the work area
When working with the machine especially pay attention to the following points:
Electric lines or pipes in work area.
Gas lines or water lines in the work area.
Checks before starting work
Check the following points before beginning work:
Condition of tools.
Machine settings.
Connection value of the machine.
Starting the machine
Observe the safety information and warning notices located on the machine.
Never attempt to switch on a machine that requires maintenance or repairs.
Switch on the machine as directed in the operator's manual.
Vertical stability
Always make sure that you maintain a safe distance when working with the ma-
chine. This applies particularly when working on scaffoldings, ladders, etc.
Caution with movable parts
Keep your hands, feet and loose clothing away from moving machine parts.
No persons endangered
Be sure that no persons are endangered by flying parts or flying chips.
Switching off the machine
Switch off the engine and pull the plug out of the plug receptacle in the following
situations:
Before breaks.
If you are not using the machine.
If you are changing the tool.
Before storing the machine, wait until it has completely stopped running.
Store the machine or put it down in such a way that it cannot tilt, fall down or slip.
Storage location
Store the machine after operation at a sealed off and dry location inaccessible to
children.
Summary of Contents for RCP 20
