WM 130/170/270
Operation
wc_tx000241gb.fm
23
5.3
To Start
See Graphic: wc_gr000655
5.3.1
Open fuel valve by moving lever down
(a1)
.
Note
:
If engine is cold, move choke lever to close position
(d2)
. If
engine is hot, set choke to open position
(d1)
.
5.3.2
Turn engine switch to “ON”
(b2)
.
5.3.3
Open throttle by moving it slightly to left
(c2)
.
5.3.4
Pull starter rope
(e)
.
Note
:
If the oil level in the engine is low, the engine will not start. If this
happens, add oil to engine.
5.3.5
Open choke as engine warms
(d1)
.
5.3.6
Open throttle fully to operate
(c1)
.
5.4
To Stop
See Graphic: wc_gr000655
5.4.1
Reduce engine RPM to idle by moving throttle completely to right
(c3)
.
5.4.2
Turn engine switch to “OFF”
(b1)
.
5.4.3
Close fuel valve
(a2)
.
a1
a2
b2
b1
c1 c2
c3
d2
wc_gr000655
e
d1