Foreword
2.5 Limitation of liability
10
Operator’s Manual | WP | 5100069895 | 01/2023 | [en-US]
2.5
Limitation of liability
In the event of the following infringements, the manufacturer disclaims
any liability for personal injury and damage to property:
• Actions contrary to this operator’s manual.
• Non-designated use
• Deployment of untrained personnel.
• Use non-approved spare parts and accessories.
• Improper handling.
• Structural changes of any kind.
• Non-observance of the General Terms and Conditions (GTC).
2.6
Use of the operator’s manual
This operator’s manual:
• must be regarded as an integral part of the machine and must be
kept in a safe place throughout its service life.
• must be passed on to each subsequent owner or operator of this ma-
chine.
• applies to various machine types from one product range. For this
reason, some illustrations may differ from the appearance of the pur-
chased machine. Variant-dependent components that are not in-
cluded in the scope of delivery can also be described.
The manufacturer reserves the right to change the information in this op-
erator's manual without notice.
It must be ensured that any changes or additions made by the manufac-
turer are immediately incorporated into this operator’s manual.
Group - Type
Material number (Mat. no.)
Configurable machine*
5100065600
WP1550A
5100062423
WP1550Aw
5100062424
* In the case of configurable machines, technical data is assigned via the
machine's sales designation.
