Safety
Structual changes 4.3
13
[en-US] | 01/2023 | 5100069895 | WP | Operator’s Manual
4.3
Structual changes
Warning!
Risk of injury due to structural changes.
Unauthorized structural changes to this machine can pose a risk to oper-
ators and/or third parties, as well as damage to the machine and/or other
property.
• Do not make any structural changes without the manufacturer's writ-
ten consent.
In particular, a structural change shall be deemed to have occurred:
• When opening of the machine and permanent removal of compo-
nents.
• Installation of spare parts that do not come from the manufacturer or
are not equivalent in design and quality to the original parts.
• Attachment of accessories of any kind that do not originate from the
manufacturer.
The manufacturer's liability and warranty are also void in the event of
unauthorized structural alterations.
Spare parts or accessories from the manufacturer can be installed or re-
moved safely.
Further information is available on the Internet at -
4.4
Responsibility of the operator
The operator is the person who operates this machine himself for com-
mercial or economic purposes or who leaves it to a third party for use/ap-
plication and bears the legal product responsibility for the protection of
personnel or third parties during operation.
• The operator must make the operator’s manual accessible to the per-
sonnel at all times and ensure that the operator has read and under-
stood the operator’s manual.
• The operator’s manual must be kept ready to hand at the machine or
at the place of use.
• The operator must hand over the operator's manual to any other op-
erator or subsequent owner of the machine.
• The country-specific regulations, standards and directives on acci-
dent prevention and environmental protection must also be observed.
The operator’s manual must be supplemented by further instructions
for compliance with operational, official, national or generally applica-
ble safety guidelines.
4
