Technical Data
General instructions 13.1
49
[en-US] | 01/2023 | 5100069895 | WP | Operator’s Manual
13
Technical Data
13.1
General instructions
Information
For system technical reasons, empty columns can be displayed in the
technical data, and numbers and letters that written in superscript or sub-
script may be displayed incorrectly, e.g:
►
Sound power level LWA instead of L
WA
►
Sound pressure level LpA instead of L
pA
►
Vibration total value ahv instead of a
hv
►
Carbon dioxide CO2 instead of CO
2
►
Unit m/s2 instead of m/s
2
13.2
Noise and vibration data
The noise and vibration data listed have been determined in accordance
with the following guidelines for the typical machine operating conditions /
special test conditions and using harmonized standards:
• Machinery Directive 2006/42/EC
• Noise Emission Directive 2000/14/EC
During operational use, values may differ depending on the prevailing op-
erating conditions.
Sound pressure level at operator station
• L
pA
was determined according to EN ISO 11201 and EN 500-4.
Guaranteed sound power level
• L
WA
was determined according to EN ISO 3744 and EN 500-4.
Weighted vibration total value hand-arm vibration
• a
hv
was determined according to EN ISO 20643 and EN 500-4.
13.3
WP
Type
WP1550A
WP1550Aw
Material number machine
5100062423
5100062424
Material number engine
5100046324
5100046324
Centrifugal force [kN]
15
15
Vibrations [Hz]
90
98
Vibrations [1/min]
5880
5880
Area output* [m2/h]
870
870
Flow [m/min]
29
29
Gradeability [%]
36,4
36,4
Length (drawbar in working position) [mm]
865
865
13