Buttons and Functions
Before you begin using your new air conditioner, make sure to familiarize yourself with its remote
control. The following is a brief introduction to the remote control itself. For instructions on how to
operate your air conditioner, refer to the
How to Use Basic Functions
section of this manual.
ON/OFF
Turns the unit on or off.
MODE
SWING
Scrolls through operation
modes as follows:
AUTO
COOL
DRY
HEAT
FAN
FAN SPEED
Selects fan speeds in the
following order:
AUTO
LOW
MED
HIGH
SLEEP
Saves energy during
sleeping hours .
TURBO
Enables unit to reach
preset temperature in
shortest possible time.
TEMP
Increases temperature in
1°C (1°F) increments.
Max. temperature is
30°C (86°F).
NOTE:
Press together &
buttons at the same time
for 3 seconds will alternate
the temperature display
between the °C & °F.
TEMP
Decreases temperature in
1°C (1°F) increments.
Min. temperature is
16°C (60°F).
TIMER ON
Sets timer to turn unit
on (see
How to Use
Basic Functions
for
instructions).
TIMER OFF
Sets timer to turn unit
off (see
How to Use
Basic Functions
for
instructions).
I SENSE
Temperature sensing and
room temperature display
button.
ECO
Use to enter the energy
efficient mode.
CLEAN
LED DISPLAY
LOCK
Press together DIRECT &
TIMER OFF buttons
simultaneously for 5 seconds
to lock the keyboard. Press
together the two buttons for 2
seconds to unlock the keyboard.
04
Model:
RG51A(2)/EF, RG51A(2)/EFU1, RG51Y7(2)/EF
RG51A10(2)/EF(20-28 C/68-82 F)
RG51A(2)/CEF(Cooling only models,
AUTO mode and HEAT mode are not available)
O
O
Used to start/stop the Self
Clean or Active Clean function.
(Model dependent, please refer
to the USER’S OPERATION &
INSTALLATION MANUAL).
Starts and stops the
horizontal louver
movement. Hold down
for 2 seconds to initiate
vertical louver auto swing
feature(some units) .
Turns indoor unit’s LED display
and air conditioner buzzer on
and off (model dependent),
which create a comfortable and
quiet environment.
NOTE:
Please do not select
HEAT mode if the machine
you purchased is cooling
only type. Heat mode is not
supported by the cooling
only appliance.
