Appendix
Page 49
APPENDIX
CARING FOR CINTIQ
Keep the Grip Pen and your Cintiq LCD screen surface clean. Dust and dirt particles can stick to the
pen and cause excessive wear to the display screen surface. Regular cleaning will help to prolong the
life of your LCD screen surface and pen. Keep Cintiq, the converter unit, and the Grip Pen in a clean,
dry place and avoid extremes in temperature. Room temperature is best. Cintiq, the converter unit,
and the Grip Pen are not made to come apart. Taking apart the product will void your warranty.
Important:
Take care to never spill liquids onto the pen display tablet, converter unit, or pen.
Be especially careful of getting the display, tablet ExpressKeys, Touch Strips, converter unit, or
pen buttons, tip, and eraser wet – they contain sensitive electronic parts that will fail if liquids
enter them.
CLEANING
To clean the Cintiq or converter unit casing or the Grip Pen, use a soft, damp cloth; you can also
dampen the cloth using a very mild soap diluted with water. Do not use paint thinner, benzine, alcohol,
or other solvents to clean the unit casing or pen.
To clean the display screen, use an anti-static cloth or a slightly damp cloth. When cleaning, apply only
a light amount of pressure to the display screen and do not make the surface wet. Do not use detergent
to clean the display screen; this may damage the coating on the screen. Please note that damage of
this kind is not covered by the manufacturer’s warranty.
12WX_Manual.fm Page 49 Thursday, September 13, 2007 3:38 PM
