INSTALLATION
Page 9
INSTALLATION
SYSTEM REQUIREMENTS
Before installing the DTU-710, make sure your computer meets the following system requirements:
•
PC.
Windows XP, 2000, Me, or 98SE. DVI or VGA video connector, available USB port, and
CD-ROM drive.
•
Macintosh.
OS X, v10.2.6 or greater. DVI or VGA video connector, available USB port, and
CD-ROM drive. ADC connectors require an ADC to DVI adaptor (not included).
The DTU-710 supports both digital (DVI) and analog (VGA) video signals. If you are updating your
video card, complete the video card hardware and software installation before connecting the DTU-710.
If you have another display that is compatible with your video card, you can connect that display to the
card in order to verify that the video card is operating correctly.
Note:
The DTU-710 can be used alone or with another display, such as a CRT monitor or LCD
projector. To use the DTU-710 with another display, you will need two video cards or a video card
with dual output. Depending on the capabilities of your video card and operating system, you may
be able to set up the DTU-710 as a mirrored, extended, or independent display. Refer to your video
card documentation for more information on its capabilities.
When you are working with more than one monitor, the DTU-710 will map to the monitors based
upon how your system is configured. By default, if you are in mirror mode, the pen tablet will map to
the entire space on each display or monitor. Please refer to your hardware and operating system
documentation for details on configuring your computer and operating system for use with multiple
monitors.
There are two primary steps to the installation process:
•
Step 1: LCD Monitor Installation
•
Step 2: Pen Tablet Installation
Be sure to follow ALL installation instructions carefully.
DTU-710_Manual.fm Page 9 Monday, August 30, 2004 3:49 PM