CUSTOMIZING
Page 23
ADJUSTING THE LCD MONITOR
FACTORY PRESETS, MULTI-SYNC, AND USER SETTINGS
Factory Presets:
To display images with the best quality (based on the incoming signal), the DTU-710
comes with a number of factory default standard display modes. Refer to page 42 for input signal
specifications.
Multi-Sync:
When connected as a VGA display, the DTU-710 attempts to automatically synchronize to
the incoming signal. Multi-sync will function when the horizontal frequency is between 30 to 80 kHz and
the vertical frequency is between 50 to 75 Hz. If the DTU-710 does not automatically synchronize with
the incoming signal, you can use the On Screen Display (OSD) R
ESET
A
UTO
A
DJUST
option to initiate
display synchronization. Further screen display adjustments can be manually made using the OSD
controls.
User Settings:
When you manually set the display using the OSD function, the settings are stored
within the DTU-710 for use the next time the unit receives a similar signal. This is applicable to all
display modes.
WORKING WITH ON SCREEN DISPLAY SETTINGS
The DTU-710 is equipped with an On Screen Display (OSD) function. The OSD function enables you
to adjust and optimize a variety of display settings at the touch of a button. The OSD controls are
located at the front of the unit.
The basic process for working with the OSD is as follows:
•
Press the M
ENU
button to open the OSD main menu.
•
Use the + or – buttons to select an option. When the option you want to adjust is highlighted, press
the E
NTER
button. The current settings and adjustment sub-menu for that option will appear.
•
Use the + or – buttons to adjust the option settings.
•
After making your changes, press the E
NTER
button to save. To exit, press the M
ENU
button.
Note:
All settings are automatically saved when the OSD menu closes. If you make changes to
the display appearance and cannot return to the original settings, use the R
ESET
R
ECALL
option
to return the DTU-710 to its original factory defaults.
Menu Button
Opens or closes the OSD menu.
Selection Buttons
Use these buttons to select an option that can be activated when you press the
E
NTER
button. After activating a selected option, press the + button to increase a
selected item value, and press the – button to decrease it.
E
NTER
Button
Activates or deactivates the
selected OSD menu option.
–
+
DTU-710_Manual.fm Page 23 Monday, August 30, 2004 3:49 PM