CUSTOMIZING
Page 26
ADJUSTING PITCH AND PHASE (VGA ONLY)
Some computers and video cards may not allow the multi-sync function to fully work when the DTU-710
is first connected. If some portion of text appears blurred, adjust pitch and phase by following the
procedure below. For crisp images, set the resolution of your video card to 1280 x 1024.
•
In the Tablet control panel, select
the C
ALIBRATE
tab.
•
If you are working with multiple
monitors, be sure the display
corresponding to the DTU-710 is
selected in the M
ONITOR
menu.
•
Click on the C
ALIBRATE
button to
activate the calibration screen.
•
Using the OSD controls, open the
OSD Menu and select the P
ITCH
icon. Then adjust the pitch level so
the pattern of fine vertical stripes
displays evenly.
•
In the OSD Menu, select the P
HASE
icon. Adjust the phase level so the
adjustment pattern shows clearly.
•
After completing these adjustments,
press the E
NTER
and M
ENU
buttons
to exit the OSD Menu.
Click on the C
ANCEL
button or press
E
SC
to exit the calibration screen.
Adjustment pattern for phase and pitch (VGA only).
DTU-710_Manual.fm Page 26 Monday, August 30, 2004 3:49 PM