APPENDICES
Page 42
PRODUCT SPECIFICATIONS
GENERAL SPECIFICATIONS
LCD MONITOR
Physical dimensions (W x D x H)
418 x 362 x 57 mm (16.5 x 14.3 x 2.2 in), excluding stand
Weight
6.2 kg (13.6 lb), including stand
Input voltage
12 VDC
Power consumption
45 W or less, (12 VDC)
Operating temperature and humidity
5° to 35° C, 20 to 80% RH (noncondensing)
Storage temperature and humidity
-10° to 60° C, 20 to 90% RH (noncondensing)
(maximum storage humidity is 38% at a temperature of 60° C, and
maximum storage temperature is 42° C at a humidity of 90%)
Certification and compliance
FCC class B, CE, VCCI class B, EDID 1.3
Display
TFT active matrix LCD
Screen size
17.0 in, diagonal
Signal Inputs
DVI (Digital)
VGA (Analog RGB)
Synchronous frequency: 30 to 80 kHz, horizontal
Synchronous frequency: 50 to 75 Hz, vertical
Resolution
1280 x 1024 pixels (SXGA), 1024 x 768 pixels (XGA),
800 x 600 pixels (SGA), 640 x 480 pixels (VGA)
Refresh rate
50 to 75 Hz (vertical)
Pixel pitch
0.264 x 0.264 mm (0.010 x 0.010 in)
Color depth
16.2 million colors (RGB 6-bits + FRC data)
Pixel Arrangement
RGB vertical stripe
Brightness
260 cd/m
2
Contrast ratio
450:1
Plug and Play
DDC2B
LCD quality
Each DTU-710 LCD panel is produced under very stringent quality
standards. Production techniques cannot guarantee an absolutely
perfect TFT display, and some panels may exhibit a certain number of
pixels that show an incorrect color. This does not mean the display is
defective.
Wacom quality standards are based on internationally accepted
standards for LCD monitors. Wacom requires 99.999% of the pixels
on each DTU-710 are required to function perfectly, and no pixel is
allowed to be always white or always black. A small number of pixels
(10 or less) are allowed to show a wrong color for some parts of the
color spectrum.
DTU-710_Manual.fm Page 42 Monday, August 30, 2004 3:49 PM