Cintiq interactive pen display components
Page 13
CINTIQ INTERACTIVE PEN DISPLAY COMPONENTS
After the Cintiq interactive pen display is safely mounted on the Cintiq stand, take some time to
familiarize yourself with its features and components.
The LCD monitor and tablet sensor function as an integrated input and output device. The LCD monitor
supports resolutions up to 1600 x 1200 pixels at 16.77 million colors. The tablet sensor reports pen
coordinates, pressure, tilt, switch, eraser, and other information.
Front view
Power LED
Lights blue when power has been supplied to
Cintiq and a video signal is present.
Glows orange when no video signal is
detected by Cintiq. (e.g., Your computer is
turned off, starting up, or has entered a power
management mode in which video signals
are not sent.)
Power switch
Turns power to
the unit on or off.
Status LED
Lights blue when the pen is in the
active area of the pen display tablet
and the pen tip, eraser, or side switch
are pressed. Note that the USB cable
connector must be plugged into an
active USB port and a video signal be
present before the LED will light.
Integrated LCD monitor and tablet
Touch Strip
Slide your finger over
the Touch Strips to
zoom, scroll, or perform
custom keystroke
actions. See
Working
with the tablet controls
on page 25.
ExpressKeys
These customizable keys simulate modifier keys,
keystrokes, and other frequently used functions.
See
Working with the tablet controls
on page 25.
ExpressKeys
Touch Strip
Cintiq21UX_Manual.fm Page 13 Friday, January 28, 2005 6:49 PM
