To con
fi
gure a PCoIP Zero Client with an endpoint manager in low or medium security mode:
1. From the AWI, select
Con
fi
guration > Management
. The AWI Management page displays.
2. Set the
Security Level
option to
Low
or
Medium
.
3. Set the
Manager Discovery Mode
to
Manual
.
4. In the Manual Discovery section, type the bootstrap server’s URI.
5. Click Apply.
After the Tera2 PCoIP Zero Client discovers the endpoint manager, the endpoint manager topology
appears on the Management page.
Discovering the Endpoint Manager Manually from the Client
Using High Security Mode
In high security mode, automatic discovery is disabled entirely; you must register the Tera2 PCoIP
Zero Client manually with the endpoint manager from the client.
To con
fi
gure a PCoIP Zero Client with an endpoint manager using high security mode:
1. From the AWI, select
Con
fi
guration > Management
. The AWI Management page displays.
2. Set the
Security Level
option to
High
.
Bootstrap server URI must use a secured WebSocket pre
fi
x
URIs are in this format and require a secured WebSocket pre
fi
x:
The PCoIP Management Console’s listening port is 5172. If you omit the port number,
port 5172 will be used by default.
wss://<internal EM IP address/
FQDN>[:port number]
Manual discovery requires a certi
fi
cate
When manual discovery mode is used, DNS cannot be used to trust the endpoint manager. TheTera2 PCoIP Zero
Client must have been previously provisioned with a certi
fi
cate using an endpoint manager.
For more information, see
Staging Clients Using an Endpoint Manager
.
Discovering the Endpoint Manager Manually from the Client Using High Security Mode
© 2020 Teradici
205
Summary of Contents for Cintiq Pro 32
