To con
fi
gure audio settings:
1. Open the Audio page:
• From the OSD, select
Options > Con
fi
guration > Audio
.
• From the AWI, select
Con
fi
guration > Audio
.
2. From the OSD or AWI Audio page, update the audio settings.
3. To save your updates, click
OK
from the OSD, or click
Apply
from the AWI.
Category
Parameter
Description
Audio Device Type
This
fi
eld applies when you enable the
Enable Local USB Audio Driver
option and
both an analog output device and a USB output device are connected to the
Tera2 PCoIP Zero Client. Since you can use only one audio device at a time
when devices are locally terminated, select the type of device you want to use:
•
Analog:
The analog output device plugged into the analog input jack on
the Tera2 PCoIP Zero Client will be used for audio playback.
•
USB:
The USB output device attached to the Tera2 PCoIP Zero Client will
be used for audio playback. If more than one is attached, the Audio
Output options enable you specify the preferred one to use.
Preferred USB
Device Vendor ID
This
fi
eld is automatically populated with the USB device’s vendor ID (VID)
after you select the preferred audio output device in the
Attached USB devices
list and apply your changes. You can also manually enter the VID of the
preferred attached USB device.
This option doesn't apply to analog audio devices.
Preferred USB
Device Product ID
This
fi
eld is automatically populated with the USB device’s product ID (PID)
after you select the preferred audio output device in the Attached USB devices
drop-down list and apply your changes. You can also manually enter the PID
of the preferred attached USB device.
This option doesn't apply to analog audio devices.
Attached USB
devices (AWI only)
In the list, select the preferred USB device to use for audio output.
Con
fi
guring Audio
© 2020 Teradici
254
Summary of Contents for Cintiq Pro 32
