Wacom Cintiq Pro 32 Manual Download

Page: 351 / 452

!!! "RSA .pem

le" In other words, make sure that all the text from

(including the dashes) in the original

.pem

le is

replaced with the contents of

(including the dashes) from the RSA .pem

le.

c. Save the original

.pem

le and close it. The certi

cate is now ready to be uploaded to the

Tera2 PCoIP Zero Client.

Import the Client Certi

cate into the Client User Account

In the Windows 2008 server, import the client certi

cate into the client user account.

To import the client certi

ﬁ

cate into the client user account:

1. Log in to the Windows 2008 server.

2. Click

Start > Administrative Tools > Active Directory Users and Computers

3. From the

View

menu, select

Advanced Features

4. Navigate to the user you created for the Tera2 PCoIP Zero Client.

5. Right-click the user, and select

Name Mappings

6. In the

X.509 Certi

cates

section, click

Add

7. Locate and select the Tera2 PCoIP Zero Client certi

cate you exported that does not contain

the private key (This

le was saved to a network location in step 9 of

Export the Client

Certi

cate

8. Make sure both identity boxes are selected. Click

, and then click

again.

Import the Certi

cates to the Client Device

From the device’s AWI, import the certi

cates.

To import the certi

cates into a pro

le using the PCoIP Management Console, see the PCoIP®

Management Console 3.1 Administrators’ Guide.

-----BEGIN PRIVATE

KEY-----

-----END PRIVATE KEY

-----BEGIN RSA PRIVATE KEY -----

-----END RSA

PRIVATE KEY-----

Import the Client Certi

cate into the Client User Account

351

Summary of Contents for Cintiq Pro 32





































































































































































































































































































































































































































































Search results

Summary of Contents for Cintiq Pro 32

Reviews:

Related manuals for Cintiq Pro 32

Brands by name

Popular brands

Wacom Cintiq Pro 32, Manual

Search results

Summary of Contents for Cintiq Pro 32

Reviews:

Related manuals for Cintiq Pro 32

Brands by name

Popular brands