61
61
Clicking is difficult.
Try using a lighter T
IP
F
EEL
. See
adjusting tip feel and double-click
.
Double-clicking is difficult.
•
Use the side switch to double-click. Review the technique in
.
•
Be sure you are quickly tapping the tablet twice in the same place on
the tablet’s active area.
•
Try increasing the T
IP
D
OUBLE
C
LICK
D
ISTANCE
. See
•
Try using a lighter T
IP
F
EEL
. See
adjusting tip feel and double-click
.
•
Set an ExpressKey to D
OUBLE
C
LICK
and use it to issue double-
clicks.
•
Windows:
Try setting your system to launch programs with a single
click. See
The pen selects everything,
will not stop selecting.
Open the Wacom Tablet control panel and go to the P
EN
tab. Move the
T
IP
F
EEL
slider toward F
IRM
, or select D
ETAILS
... and increase the C
LICK
T
HRESHOLD
setting. If this does not help, see
The eraser selects everything
or will not stop erasing.
Open the Wacom Tablet control panel and go to the E
RASER
tab.
Move the E
RASER
F
EEL
slider toward F
IRM
, or select D
ETAILS
... and
increase the C
LICK
T
HRESHOLD
setting. If this does not help, see
.
You notice a delay at the
beginning of pen or inking
strokes.
Open the Wacom Tablet control panel and go to the P
EN
tab.
Try decreasing the T
IP
D
OUBLE
C
LICK
D
ISTANCE
(see
). If that does not work, try dragging the T
IP
D
OUBLE
C
LICK
D
ISTANCE
slider to the O
FF
position in order to turn off double-click
assist.
You have to press hard with the
pen when clicking, drawing, or
writing.
Open the Wacom Tablet control panel and go to the P
EN
tab. Move the
T
IP
F
EEL
slider toward S
OFT
, or select D
ETAILS
... and decrease the
S
ENSITIVITY
and C
LICK
T
HRESHOLD
settings.
The pen tip does not function.
Be sure you are using the pen that originally came with Intuos4.
Other pens may not function properly on the tablet.
Make sure a tablet status LED brightens when the tip is pressed.
If not, you may have defective hardware. See
Check the control panel’s P
EN
tab and verify that a C
LICK
function is
assigned to the tip.
Changing the function settings
of an input tool has no effect.
Make sure you change the settings for the tool and the application that
you are using. See
