Page 31
CHOOSING PEN OR MOUSE LIKE MOVEMENT
You can choose how the screen cursor reacts to the motion of your UltraPen on the tablet:
Pen Mode. When you select Pen Mode, the tablet acts as a mapped representation of your computer
screen. Wherever you place the UltraPen on the tablet, the cursor jumps to the same corresponding point
on the screen. This is called “
Mouse Mode. When you select Mouse Mode, the UltraPen positions and moves the screen cursor the
same way a mouse does—which is not accurate for tracing. This is called “relative positioning.”
To choose between Pen or Mouse Mode:
In the PenPartner control panel, click on the Pen Mode or Mouse Mode button. Your changes take
effect immediately.
Moves cursor to correspond with
position of UltraPen on the tablet
(absolute positioning.)
Moves cursor like a mouse
(relative positioning).
