background image

 

Precautions on use and handling

     page  3

 

Handling

 

W

 

ARNING

 

High Voltage.  Do not open or disassemble the DTF-521/PL-521 pen display.  
There is a risk of electrical shock when the casing is open.

 

  This will also void your 

warranty and Wacom shall have no responsibility to repair or replace the product.

 

W

 

ARNING

 

If the LCD screen has been damaged, DO NOT touch any liquid that may be leaking 
from it;

 

 this liquid is an irritant.  In case of contact with skin, eyes, or mouth, rinse 

immediately with running water for at least 15 minutes or more.  If contact is made with the 
eyes or mouth, also consult a physician.

 

W

 

ARNING

 

 – LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE 

RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL 
LAWS.

 

The DTF-521/PL-521 pen display has a backlight which contains mercury (Hg).

 

  Be sure 

to dispose of properly, and to manage any disposal of this unit in accordance with your local 
ordinances and laws.

 

W

 

ARNING

 

Prevent children from swallowing the pen tip or side switch.

 

  The pen tip or side switch 

may accidentally be pulled out if children are biting on them.

 

C

 

AUTION

 

Do not disassemble the pen.

 

  This may cause the device to malfunction.  In this case, 

Wacom shall have no responsibility to repair or replace the product.

 

C

 

AUTION

 

Do not scratch the display screen.

 

  Avoid placing sharp objects on the display screen 

surface.

 

C

 

AUTION

 

When adjusting the tilt angle of the pen display, be careful to avoid catching your 
finger in the gap of the movable portion of the stand.

C

 

AUTION

 

Do not lift the DTF-521/PL-521 by the stand; this may damage the stand mechanism.

 

  

When lifting or moving the pen display, always do so by grasping the main body casing.

 

C

 

AUTION

 

Avoid intensive shock or vibration to the DTF-521/PL-521 or the pen.

 

  Hitting or dropping 

the pen display may damage the display screen or other components.

 

C

 

AUTION

 

Do not put heavy articles on the pen display or push against it with a strong force;

 

 this 

may damage the display screen or bend the stand.

 

C

 

AUTION

 

Do not place heavy articles on the DTF-521/PL-521 cabling, repeatedly bend the cables 
sharply, or apply heavy stress to the cable connectors;

 

 this may damage the unit or 

cabling.

 

C

 

AUTION

 

If the pen tip becomes sharp or angular, it may damage the coating on the display 
screen.

 

  Please replace the pen tip if necessary.

 

C

 

AUTION

 

Do not use any organic solvent (e.g., alcohol) or even mild detergent to clean 
the display screen.  Use of these cleaners can damage the coating on the screen.  
Please note that damage of this kind is not covered by the manufacturer's warranty.

 

To clean the display screen, use an anti-static cloth or a slightly damp cloth.  
When cleaning, apply only a light amount of pressure to the display screen and do not 
make the surface wet. 

To clean the pen display casing or pen, use a soft cloth with mild detergent (such as dish 
washing liquid) diluted with water.

Hg

 

DTF521_Manual.fm  Page 3  Tuesday, February 28, 2006  10:36 AM

Summary of Contents for DTF-521 series





















































Reviews: