background image

 1 

   

So that the DTF-521 may be Used Safely..

.

Regarding the power plug and power 

adapter. 

-Please remove dust from the power 

plug regularly. The addition of moisture, 

etc. to accumulated dust may lead to 

fire. 

-Please do not use any power adapters 

other  than  those  included  with  the 

product. Ignoring this warning may 

result in fire or product failure. 

-Please  do  not  damage  or  forcibly 

bend  or  bundle  the  power  adapter 

cord. Also, please do not place heavy 

objects on it or expose it to excessive 

heat. Ignoring this warning may result 

in fire, electric shock or product failure.  

-In the unlikely case that the power 

adapter should produce smoke or a 

strange odor, please disconnect it from 

the wall outlet and return it to either the 

store where you purchased it or to the 

Wacom Customer Support Center for 

repair service. 

-Please do not connect or disconnect 

the  power  adapter  with  wet  hands. 

Ignoring this warning may result in 

electric shock or malfunction. 

-Please  do  not  open  or  otherwise 

change the power adapter. Ignoring 

this  warning  may  result  in  fire  or 

electric shock.

In order to prevent this, when in such 

locations, always disconnect the productʼ

s USB connector from your computer 

and turn off the switch. 

Do not open the back cover. 

Inside  this  product  there  are  several 

high-voltage parts. Persons other than 

professional service personnel should 

never  open  the  back  cover  of  this 

product. Unauthorized opening of the 

back cover may lead to fire or electric 

shock. 

When this product ceases to operate 

normally  due  to  being  dropped  or  a 

similar cause, remove the power source 

cable from the electrical outlet. 

Leaving the power cable connected may 

result in fire or electric shock.  

This product may cause other electronic 

devices to malfunction, or other devices 

may cause this product to malfunction.

Turn this product off in places where 

the  use  of  electronic  equipment  is 

prohibited. 

In airports, hospital intensive care units 

and other such places where the use 

of electronic equipment is prohibited, 

this product may adversely affect the 

operation  of  other  electrical  devices. 

The  following  symbols  appear  throughout  this  user  guide  in  order  to  ensure  safe  use  of   the 

DTF-521 (hereafter referred to as “DTF-521,” “the product” or “this product”). Please read these 

items carefully and always heed the Warning and Caution items when using your DTF-521.

This symbol indicates an item that, if ignored when handling the product, 

could lead to the loss of life or serious injury.

Warning

This symbol indicates an item that, if ignored when handling the product, 

could lead to injury or damage to personal property. 

Caution

Meanings of Symbols:

Indicates that it is important to be careful when taking the action or actions noted.
Indicates that the action or actions noted are to be avoided.
Indicates it is important to take the action or actions noted.

Warning

Do not use the product in a facility 

control  system  that  requires  an 

extremely high level of reliability. 

User's Guide

Summary of Contents for DTF-521 series

































Reviews: