USING AN ALTERNATE MOUNT OR STAND
Mounting screws that are 4 mm wide with a 0.7 mm pitch (M4 Regular), with a screw clearance depth of 17 mm
are required. Exceeding the clearance depth of 17 mm will damage the internal components of the pen display.
To remove the adjustable stand and attach the pen display to a different mounting platform:
1. Turn off your computer and power off the pen display.
Then disconnect all cables from between the unit and your computer.
2. Protect the display screen surface by spreading a soft cloth onto a flat table and placing the pen display face down
on the cloth.
3. Remove the screws and lift the adjustable stand assembly away from the body of the unit.
4. Using the appropriate screws for your mounting platform, firmly attach the pen display to the alternate mounting
platform.
5. Reattach the cabling.
Caution
When attaching the pen display onto an alternate mounting platform, be sure to follow all instructions in the
documentation supplied by the platform manufacturer. If improperly installed, the unit could fall, resulting in damage to
the unit or physical injury.
If you will be using the interactive pen display in an installation that requires the use of an alternate mounting
platform, you can remove the adjustable stand from the unit and mount the pen display onto any mount arm or
stand conforming to the VESA standard.
