background image

60

60

Interactive pen display

Contents

Index

Index

Contents

VGA PROBLEMS 

The display ripples or flickers.

Open the OSD menu and select the A

UTO

 A

DJUST

 option.  

Verify that the display adapter or video card matches the 
specifications for the interactive pen display.

Adjust the refresh rate in the display properties control panel.

The display is not clear.  
Text or other portions of the 
screen appear blurred.

Set the display resolution of your video card to the maximum 
(native) resolution that can be used with your pen display.  See the 

Product information

 for details.

Turn off the pen display, then turn it back on.

Open the OSD menu and select the A

UTO

 A

DJUST

 option.  

The display and LCD panel are 
not lined up.  The display size 
is not correct.

Open the OSD menu and select the A

UTO

 A

DJUST

 option. Note that 

some video cards may not show the display in proper sizing.

The display ripples or shows a 
moiré pattern.  The display 
color is not even.

Open the OSD menu and select the A

UTO

 A

DJUST

 option.  If this 

does not solve the problem, select the R

ESET

 option to set the 

display back to the factory default settings.

Summary of Contents for DTK-2241






















































































Reviews: