9
9
Interactive pen display
REAR VIEW
Important: Do not lift the unit by the stand; this may damage the stand mechanism. When lifting or moving
the pen display, always grasp the main body casing.
Always store the interactive pen display on a stable surface or in its original packing carton when not
in use. Be sure to adjust the stand to the low tilt position before packaging. If you do not close the stand,
the notched mechanism may be damaged during transportation and storage.
Security slot
Allows easy attachment
of a security cable.
Pen storage compartment
Store by inserting one end of the pen into either side of the
compartment. Then gently press other end of pen into the
compartment. Take care not to damage the pen nib.
Remove the pen by placing your finger underneath the pen and
pulling the pen out of the compartment.
Stand adjustment lever
Connection panel
•
Power connector
•
DVI-I out connector
•
DVI-I in connector
•
USB connector
Display stand
Adjusts the tilt angle of the unit. See
Pen tether attachment points (2)
If using a pen tether, connect it to an
attachment point located on either
side of unit.
