18
CAUTION
When attaching DTU-710 onto
an alternate mounting platform,
be sure to follow all instructions
in the documentation supplied
by the platform manufacturer.
If improperly installed, the unit
could fall and be damaged.
Using an Alternate Mount or Stand
unscrew
1.
Turn off your computer and
power off DTU-710. Then
disconnect all cables from
DTU-710.
2.
Protect the display screen
surface by spreading a soft
cloth onto a flat table and
placing DTU-710 face down
on the cloth.
3.
Remove the four screws
and lift the adjustable stand
assembly away from the body
of DTU-710.
4.
Using the appropriate screws
for your mounting platform,
firmly attach DTU-710 to the
alternate mounting platform.
5.
Rettach the cabling.
If you will be using DTU-710 in an installation that requires the use of an alternate
mounting platform, you can remove the adjustable stand from DTU-710 and mount the
pen display onto a VESA conforming mount arm or stand.
A VESA mounting platform will require mount screws that are 4 mm wide with a 0.7
mm pitch (M4 Regular), and a maximum screw clearance depth of 15 mm. Exceeding
the screw clearance depth of 15 mm will damage DTU-710 internal components.
To remove the adjustable stand and attach DTU-710 to a different mounting platform:
DTU-710 Component Functions
