Page 114
2.
Check the pen. Press the pen tip against the surface of the tablet. The status LED on the tablet
should turn from orange to green. Now, without applying pressure to the pen tip, press the side switch.
The status LED should again turn from orange to green. If not, you may have a defective pen or tablet.
See
.
TESTING SERIAL TABLETS
Make sure your Intuos tablet is properly connected and that power is on to both your computer and tablet.
Then try the following tests.
1.
Check power to the tablet. You should see the tablet’s orange status LED whenever the tablet cable
is connected to AC power, the power switch is turned on, and your AC power adaptor is plugged in.
If not, try the following:
•
Make sure the AC power adaptor is securely connected to the tablet cable.
•
Make sure the AC power supply is plugged into an active outlet.
•
Make sure the tablet is turned on (12x12 and larger tablets).
Important: Use only the AC adaptor that came with Intuos. Other adaptors may cause damage to
your tablet.
If the orange status LED did not come on, you may have a defective tablet or power supply.
See
.
