Page 47
TESTING YOUR TABLET
Make sure your computer is turned on, the operating system has finished loading, and the tablet is properly
connected to an active USB port. Then try the following tests:
1.
Check the tablet. The tablet’s orange status LED will light whenever the tablet is properly connected and your
computer has registered it as a USB device. If the LED is on, continue with step 2.
If the tablet status LED does not glow when the computer is on and the system has fully loaded, then:
•
Make sure the tablet USB cable is securely connected to an active USB port on your computer.
•
If you are connecting the tablet to a USB hub (or hub device such as a keyboard with USB ports), be sure
the USB hub is properly connected to your computer and is active.
•
Connect the tablet to a different USB port or try connecting to the USB port on another computer.
If the tablet’s status LED does not illuminate after your computer is on and has finished booting up, your USB
port may be disabled. Verify that you have connected the tablet to an active USB port.