background image

USING INTUOS

     Page  39

Contents

Index

USING THE AIRBRUSH

The Intuos Airbrush is similar to the Intuos Pen, but also includes a fingerwheel for an additional degree of 
control.  With proper software support, you can simulate realistic airbrushing.  For example, tilting the 
Intuos Airbrush can cause the spray pattern to elongate and feather out.  Rolling the fingerwheel can 
adjust the spray intensity, and pressure on the tip can control the brush size.

Pointing

Clicking

Erasing

, and 

Proximity

 are similar to the pen.  For additional information, refer to 

Holding the Airbrush

 and 

Using the Pen

.

Important: When the airbrush is not in use, place it in the Intuos pen stand or lay it flat on your 
desk.  To maintain the sensitivity of your airbrush tip, do not store the airbrush in a container where 
it will rest on its tip.

Leaving an Intuos tool on the tablet may interfere with screen cursor positioning when using other 
pointing devices. 

Summary of Contents for INTUOS - FOR MACINTOSH




































































































































































Reviews: